COMELETRIC Lock Out Relays

Model LR102
When a failure occurs, the LOR intervenes, tripping the contacts and locking the system.
All the critical circuits will be isolated and will remain isolated until the malfunction is solved.
Its positive trip action ensures that all the contacts would perform as to requirements and its multi-contacts arrangements eliminate the need for several control relay contacts.

Model LR109 (with Trip Coil Monitoring System)
Due to the supervision system, there is instantaneous signalling of the malfunctioning of the relay releasing coil, by means of a visual LOCAL indication (GREEN LED=FUNCTIONING COIL /YELLOW LED= COIL INTERRUPTED) and REMOTE indication due to a change over contact that can be connected SCADA.
Also present is the visual LOCAL FAULT indication via RED LED, in this case it is unless to arm the relay as long as the indication is present.
Available Voltages : 24V – 48V – 110V – 125V – 220Vdc.

Model LR103 (with Manual Push Button Release)
The manual release is due to a push button located below the Handle of the LOR , the action is directly on a Mechanical latch on the LOR. This is used in an emergency or test.
This permit to latch the relay is also in case of burning of the coil.

Model LR601
Lock Out Relay with R16 Blocks of contacts, can be assembled up 25 Decks of contacts , 25NO + 25NC